Network Switches

UNIFI 8 POE SWITCH ( USW-LITE-8- POE) Price in Kenya

In stock
KES 24,999.00 KES 27,000.00

You save KES 2,001.00

Buy USW-Lite-8-PoE in Kenya at Reisen. Compare verified features, installation needs, compatibility, and related equipment before ordering online.

View product details
Availability
1000 available
Need help choosing?

Talk to our team at +254 714 804 532

Product details

UNIFI 8 POE SWITCH ( USW-LITE-8- POE)

UNIFI 8 POE SWITCH ( USW-LITE-8- POE) is listed in the Reisen Kenya catalog. The product described here is a 8-port UniFi Gigabit switch with four PoE+ outputs. The most useful buying decision is whether its actual interfaces, power requirements, performance limits, and operating environment suit the site. This guide explains the model information that can be confirmed from the available documentation and the practical checks that avoid unnecessary replacements or installation delays.

For Kenyan buyers searching for USW-Lite-8-PoE price in Kenya, the initial hardware cost is only one part of the decision. The full installation may also require suitable power equipment, the correct copper or fiber cables, mounting hardware, rack space, upstream Internet or routing, and a realistic support plan. Compare the exact order code and the supplier quotation before payment; a near-identical model name can represent a very different power budget, port mix, or accessory bundle.

For exact-model details, use the Ubiquiti official USW-Lite-8-PoE specifications. Hardware revisions and regional options still need to match the unit being purchased.

What This Product Does and Who Should Buy It

A switch in a surveillance network provides Ethernet connectivity and, when the port hardware is verified as PoE-capable, can supply electrical power over compatible cabling. This can simplify camera installation, but successful service depends on the whole system.

PoE budget and device wattage

A camera or access point may negotiate a PoE standard successfully yet overload a switch when several devices operate together. Add each endpoint’s maximum declared draw, not its idle draw, and reserve a margin for start-up, heating, and future additions. A switch-wide budget is the ceiling shared by all active power ports; individual port limits are a separate constraint. For this product, inspect its exact output-port map before plugging in a high-power PTZ or a wireless bridge. If the load cannot be supported, use a properly rated external injector or choose a switch with more aggregate power.

Uplink planning and recorder connections

In surveillance designs, the recorder is an IP endpoint that receives streams over the network. Connect cameras to powered access ports only where the switch is proven to support their PoE standard. Connect the NVR or router through an uplink that has sufficient capacity for aggregate video traffic. Keep camera management, time synchronization, and storage traffic in mind when selecting uplink speed. An SFP slot accepts an optical transceiver only when module type, optical standard, fiber grade, and peer equipment match.

VLANs and access control

When the exact model provides management features, a dedicated camera VLAN can separate surveillance endpoints from employee laptops and guest devices. Decide whether the NVR needs access to every camera, whether the viewing workstation needs cross-VLAN connectivity, and which router/firewall controls that traffic. Avoid assuming a managed switch automatically enforces security without proper configuration. Where management is unverified, do not promise VLAN controls; use an upstream managed device instead.

How to Choose the Right Configuration in Kenya

·       Verify exact model. Confirm it for the physical unit and the actual installation rather than trusting a similar model listing.

·       Count powered endpoints. Confirm it for the physical unit and the actual installation rather than trusting a similar model listing.

·       Add max PoE loads. Confirm it for the physical unit and the actual installation rather than trusting a similar model listing.

·       Plan uplinks. Confirm it for the physical unit and the actual installation rather than trusting a similar model listing.

·       Test full system. Confirm it for the physical unit and the actual installation rather than trusting a similar model listing.

Title: How to Buy USW-Lite-8-PoE - Description: Five model-relevant buying checks for USW-Lite-8-PoE; product-specific approval and validation steps.

How to Buy USW-Lite-8-PoE. Verify exact model; Count powered endpoints; Add max PoE loads; Plan uplinks; Test full system.

Key Specifications

Feature

Verified model information / purchase check

Gigabit Ethernet ports

8 × RJ45 total

PoE output ports

4 × PoE+

Non-PoE data ports

4 × Gigabit RJ45

Available PoE output budget

52 W total

Individual PoE+ port maximum

30 W; shared 52 W total applies

Power input

External AC/DC adapter, 60 W (manufacturer specification)

Model suffixes, hardware revisions, exact accessory packs and regional certifications should be checked against the delivered hardware. Unverified details are intentionally excluded from definitive specifications.

What These Model Details Mean for Your Installation

Gigabit Ethernet ports

Gigabit Ethernet ports: 8 × RJ45 total. A port count is useful only after the role of each socket is understood. Distinguish endpoint ports from uplinks and check whether a port supplies PoE, carries Gigabit data, or shares a combo interface. Draw a port schedule for the site before ordering.

PoE output ports

PoE output ports: 4 × PoE+. Power planning must be based on the real connected load and the exact input or output standard. A published aggregate wattage must not be mistaken for the amount available independently on every connection. Document the supply used and leave a safe operating margin.

Non-PoE data ports

Non-PoE data ports: 4 × Gigabit RJ45. Power planning must be based on the real connected load and the exact input or output standard. A published aggregate wattage must not be mistaken for the amount available independently on every connection. Document the supply used and leave a safe operating margin.

Available PoE output budget

Available PoE output budget: 52 W total. Power planning must be based on the real connected load and the exact input or output standard. A published aggregate wattage must not be mistaken for the amount available independently on every connection. Document the supply used and leave a safe operating margin.

Individual PoE+ port maximum

Individual PoE+ port maximum: 30 W; shared 52 W total applies. Power planning must be based on the real connected load and the exact input or output standard. A published aggregate wattage must not be mistaken for the amount available independently on every connection. Document the supply used and leave a safe operating margin.

Installation Architecture and Connections

Plan the complete connection path before drilling, fixing a rack device or energizing the equipment. Identify the upstream router, cable type, source of electrical power and each supported endpoint. The connection layout below distinguishes network traffic from electrical supply so that installers can prepare the right cables and protection.

Title: USW-Lite-8-PoE installation diagram - Description: Product-specific installation diagram for USW-Lite-8-PoE with labeled power and data paths, compatible device roles and key connection cautions.

USW-Lite-8-PoE installation diagram. The exact power method, endpoint support and cable type must match the installed product.

Understanding the Ports, Performance, and Practical Limits

Evaluate actual usable interface groups rather than relying on a single total port number. Uplinks, combo interfaces, downstream Ethernet sockets and powered ports have different roles. When comparing technical capacity, separate link signaling rates from customer throughput and check whether multiple physical connectors share one logical interface.

Title: USW-Lite-8-PoE verified capability comparison - Description: Verified interface counts or conservative model-identification checks for USW-Lite-8-PoE; unsourced numerical figures are omitted.

USW-Lite-8-PoE verified capability comparison. Values are counts or stated signaling specifications, not an independent field benchmark.

Cabling distance and copper quality

Standard Ethernet channel design is generally based on a nominal 100-meter channel under the appropriate cabling standards, not a promise that every installation works at that distance. Excessive resistance, poor terminations, copper-clad aluminum cable, or water ingress can cause PoE voltage drop. When a model offers an extend mode, inspect the trade-off: extended reach may reduce negotiated data speed and is not a substitute for a tested engineered link.

Commissioning and acceptance tests

Before leaving a site, record the port-to-device schedule, PoE draw, firmware, administrative credentials, uplink assignments, and observed errors. View a live camera stream and confirm the recorder retains footage after a controlled reconnect. Test one port at a time instead of connecting a complete camera estate to an undocumented switch. Keep backups of switch settings where supported and verify that a remote monitoring service cannot be reached from an unintended guest network.

Cloud versus local management

Some Dahua switch families offer local management and associated cloud tools, but that varies by model and hardware version. Understand the difference between cloud telemetry, actual configuration access, and an unmanageable plug-and-play unit. A cloud platform adds operational convenience but can also create dependency on account access and Internet availability. Keep written administrator recovery procedures and avoid giving every installer permanent access to production credentials.

Planning Priorities for the Installation

A useful design starts with the customer’s problem and works backward to the hardware. Check the real site conditions, document the required coverage or port count, calculate electrical needs and agree on a support plan before ordering. The following selection framework helps organize those decisions in a practical sequence.

Title: USW-Lite-8-PoE deployment planning wheel - Description: Five qualitative installation and buying considerations around USW-Lite-8-PoE; deliberately no invented pie-chart percentages.

USW-Lite-8-PoE deployment planning wheel. A qualitative planning framework rather than fabricated chart percentages.

Compatibility with Routers, Switches, Cameras, and Accessories

Compatibility is a chain of requirements. A connector that fits is not proof that two devices share the correct voltage, PoE protocol, optical standard, management method, or supported software features. Check each connection against the intended endpoint and physical hardware before buying or energizing a system.

For a practical comparison of the other end of the installation, review DH-IPC-HDW2449T-S-PRO in the Reisen catalog. This is useful for understanding the overall system design; exact interoperability or power compatibility still requires separate verification.

Title: USW-Lite-8-PoE compatibility matrix - Description: Compatibility decision matrix for USW-Lite-8-PoE, distinguishing verified roles from required component and cable checks.

USW-Lite-8-PoE compatibility matrix. Compatibility statements are conditional on the connected devices and revision.

How to Install and Use USW-Lite-8-PoE

A Step by Step Guide to Installing and Using USW-Lite-8-PoE

Step 1 — Confirm and document the exact hardware. Read the label on the physical unit and compare it with the quotation, packaging and official documentation where available. Record the serial number, revision and supplied accessories so later support decisions refer to the same product.

Step 2 — Plan the location and connections. Sketch the power path, data path and connected equipment before making permanent mounting holes or terminating cables. Identify access for maintenance and protection from dust, heat, water, accidental knocks or unauthorized tampering.

Step 3 — Check supply ratings and cabling. Verify the power method, matching connector, cable condition and route before applying voltage. Follow manufacturer and electrical-safety instructions. For PoE, confirm whether it is active or passive and calculate available budget.

Step 4 — Connect the minimum working system. Begin with the upstream network and one proven endpoint. Verify link indicators, IP addressing, correct media negotiation and application response before adding the remaining equipment. This isolates wiring and protocol issues.

Step 5 — Configure only supported features. Access documented management tools if the product actually supports them. Otherwise do not look for fictional dashboards on an unmanaged switch, patch panel, PDU, or basic storage device. Change default credentials where applicable.

Step 6 — Run an acceptance test. Test the real use case: network throughput for a switch, stable radio coverage for an AP, recorded footage for a camera, certified cabling for a panel, electrical load for a PDU, or sample restore for storage.

Step 7 — Record the as-built result. Document port assignments, routes, administrative recovery process, actual power loads, cable labels and any deviations from the original plan. Store the record securely for future service.

Onsite Commissioning and Troubleshooting

The strongest test is one that reproduces the customer’s intended use rather than merely showing a power light. Record both a successful baseline and a likely failure mode, so another technician can tell the difference between an endpoint problem, cable problem and network configuration problem.

Title: USW-Lite-8-PoE onsite verification map - Description: Non-statistical bubble map describing five essential installation checks for USW-Lite-8-PoE; no fabricated numeric bubble sizes.

USW-Lite-8-PoE onsite verification map. Five areas to inspect during commissioning; no implied statistical values.

Redundancy and growth

A current deployment may occupy only half the available ports, but growth can add cameras, access points, and a second recorder quickly. Allow room for cable management, cooling, uplink upgrades, and power load—not just a spare RJ45 socket. For business continuity, note that an ordinary switch is a single point of failure even when it has many ports. A suitable UPS and a documented replacement plan often matter as much as the switch’s advertised capacity.

Troubleshooting a dead camera port

A dark camera can have several causes: missing PoE negotiation, damaged cabling, wrong power standard, insufficient switch budget, blocked network access, or a faulty endpoint. Start by checking link lights and the manufacturer’s port power status where available. Test with a known-good patch lead and one compatible device. If data is present but no video appears, inspect addressing and recorder compatibility rather than immediately replacing the switch.

Real-World Deployment Examples

Retail security upgrade

A shop may start with four cameras and later add a loading-bay camera, a back-office camera, and a separate viewing station. The correct switch is selected by actual endpoint wattage, link speeds, and NVR traffic, not merely the largest advertised port count. In a procurement review of USW-Lite-8-PoE, identify the desired outcome, map the equipment already onsite, and list the minimum test that would prove the system works. This helps compare complete installed cost rather than only the list price. For a Kenya-based installation, also plan practical access for service, delivery logistics, and written handover information.

School or campus segment

Several buildings might have separate cable cabinets and cameras feeding a central recorder. Fiber uplinks can be valuable across long building-to-building paths, but optics and grounding require a planned design. In a procurement review of USW-Lite-8-PoE, identify the desired outcome, map the equipment already onsite, and list the minimum test that would prove the system works. This helps compare complete installed cost rather than only the list price. For a Kenya-based installation, also plan practical access for service, delivery logistics, and written handover information.

Warehouse perimeter

Outdoor cameras may use higher power for illumination or motor movement. Their operating mode, voltage needs, and cable exposure should be confirmed from their own datasheets. In a procurement review of USW-Lite-8-PoE, identify the desired outcome, map the equipment already onsite, and list the minimum test that would prove the system works. This helps compare complete installed cost rather than only the list price. For a Kenya-based installation, also plan practical access for service, delivery logistics, and written handover information.

Recommended Accessories and Related Products

A useful accessory solves a real limitation in the proposed installation. Do not order a powered device merely because it appears in a cross-selling block; first check mechanical fit, port standard, voltage, software support, power budget and the customer’s broader system.

For a related part of the same installation, explore DH-IPC-HDW2449T-S-PRO on Reisen to compare an alternative powered switch, compatible IP-camera requirements or cabling infrastructure. Check the linked product’s own specification and configuration before treating it as an exact compatible pair.

For a related part of the same installation, explore DH-IPC-HFW2449M-S-B-PRO on Reisen to compare an alternative powered switch, compatible IP-camera requirements or cabling infrastructure. Check the linked product’s own specification and configuration before treating it as an exact compatible pair.

For a related part of the same installation, explore AICO 24-port patch panel on Reisen to compare an alternative powered switch, compatible IP-camera requirements or cabling infrastructure. Check the linked product’s own specification and configuration before treating it as an exact compatible pair.

For a separately sourced, relevant comparison where the project needs it, review Tawa’s Ubiquiti switch and access-point options. This is a comparison resource rather than a claimed included accessory or guaranteed identical model.

Advantages and Limitations

·       Advantage: 8-port unifi gigabit switch with four poe+ outputs can simplify a correctly specified poe installation when its real model and connections match the requirement.

·       Advantage: The guidance above gives buyers a traceable way to compare ports, wiring, power and the complete bill of materials before payment.

·       Limitation: Connected equipment, cable quality, installation conditions and firmware can limit the achievable result even when the product meets its own specification.

·       Limitation: Accessories and compatibility must be confirmed for the exact supplied revision; a similar-looking unit is not a substitute for verification.

What’s in the Box

Item / component

Status for this exact order

Switch unit

USW-Lite-8-PoE device

Power adapter

External 60W adapter per official Ubiquiti specification

Optional transceivers, Ethernet leads, power injectors, camera mounts and rack accessories must not be treated as included unless the exact package documentation confirms them.

Product Guides, Documentation, and Support

Check current installation instructions and supported revisions in the official manufacturer model documentation. A reseller photo or generic wiring video cannot establish the hardware version in your box.

Warranty and Returns

Confirm current written warranty conditions, replacement eligibility, inspection requirements, original packaging requirements and delivery terms with Reisen before ordering. No fixed warranty period or return window is promised here because the exact seller policy for this product has not been verified.

Frequently Asked Questions About USW-Lite-8-PoE

Can I buy this product in Kenya?

USW-Lite-8-PoE is listed in the Reisen catalog. Confirm live stock, final quote, payment conditions, delivery coverage and the exact supplied revision at checkout.

Does this product automatically power connected devices?

Only when the actual hardware and appropriate powered ports support the required power standard. A passive panel, unpowered switch or external disk does not deliver Ethernet PoE merely because it has an Ethernet-related role.

Will it work with equipment from another brand?

It may, where protocols, voltage, connector type, firmware, cabling and performance requirements match. Cross-brand support must be tested rather than assumed from a similar port shape.

Does the price include installation?

The catalog hardware listing alone does not establish labor, mounting, cable, transport or configuration charges. Ask for a written installed-system quotation if those services are needed.

What should I test after installation?

Verify the intended result end to end, including link or signal quality, stable electrical supply, correct addressing or data transfers, authorized access and a documented recovery procedure.

What is the main mistake to avoid?

Do not substitute another model or revision for USW-Lite-8-PoE without comparing the actual function, port layout, power method and manufacturer documents.

How to Order in Kenya

Before placing a purchase order for USW-Lite-8-PoE, send the exact model code, required quantity, destination county, intended application and expected installation date. Ask Reisen to confirm hardware revision, available stock, package contents, warranty terms and any optional installation accessories. Procurement teams can request a formal quotation and compare the total installed cost, including VAT treatment and delivery arrangements, rather than comparing incomplete hardware-only prices.

Reisen is working toward being a leading eCommerce platform in Kenya and a leading eCommerce platform in Africa through useful technical product information, transparent buying guidance and supportable purchasing decisions. These are business aspirations, not claims of independently proven market leadership.

Additional information

ProductUNIFI 8 POE SWITCH ( USW-LITE-8- POE) Price in Kenya
CategoryNetwork Switches
PriceKES 24,999.00
AvailabilityIn stock