ADSS J HOOK SUSPENSION CLAMP HC-10-15/HC-15-20 Price in Kenya

Product details

ADSS J-Hook Suspension Clamp HC-10-15/HC-15-20 Price in Kenya

The ADSS J-Hook Suspension Clamp HC-10-15/HC-15-20 supports compatible round ADSS fiber cable along an aerial route. It is intended for suspension points identified in the network’s mechanical design.

Unlike an anchor clamp, a suspension fitting supports the cable rather than serving as a universal dead-end termination. Selecting the appropriate fitting helps maintain the intended cable position without applying unsuitable pressure to the jacket.

The two model designations represent different cable-size selections. Confirm the supplied manufacturer’s diameter range and mechanical rating before installation.

Key Specification

Features and Benefits

Supports planned cable routes

The clamp provides a defined support point where the aerial design calls for suspension.

Cable-specific selection

Choosing the correct insert and diameter range helps prevent loose seating or excessive compression.

Useful for maintenance

A correctly specified replacement fitting can restore support where existing hardware is damaged or unsuitable.

For cable sourcing, review the fiber-optic cable range at Orbitlink Solutions.

How to Install the Suspension Clamp

1. Identify whether the location requires suspension or anchoring.
2. Measure the cable and verify the exact clamp range.
3. Check the pole, bracket, and fasteners against the installation design.
4. Inspect the clamp and its cable-contact components.
5. Secure the supporting attachment using the specified method.
6. Place the cable correctly in the clamp.
7. Close and secure the retaining components without over-compressing the jacket.
8. Confirm alignment, sag, and clearances.
9. Check optical performance after installation.

Qualified aerial crews should complete the work using suitable access equipment and required electrical clearances.

Applications

Suitable applications include approved intermediate support points, aerial ADSS distribution routes, network extensions, and replacement suspension fittings.

Advantages and Disadvantages

Advantages: Dedicated cable-support function; useful for organized aerial installations; available in different cable-size variants.

Disadvantages: Requires precise cable matching; cannot automatically replace an anchor clamp; ratings vary between manufacturers.

Troubleshooting

Frequently Asked Questions

Can one variant hold every cable size?
No. Match the cable to the documented range.

Can it terminate a tensioned span?
Use the anchoring fitting specified by the route designer.

Buy ADSS Suspension Clamps in Kenya

Request the appropriate HC variant from Reisen SEO, providing cable diameter and route requirements.