FAT Box 1X2 Empty Price iv Kenya

Product details

FAT Box 1×2 Empty Price in Kenya

The FAT Box 1×2 Empty is a compact enclosure for a small fiber termination or distribution arrangement. It allows an installer to select the internal optical components according to the project.

Its empty configuration is useful when the connector type, splice arrangement, or required accessories have already been specified separately. It should not be assumed to include a splitter, adapters, pigtails, or patch cords.

Key Specification

The “1×2” designation describes the listed enclosure configuration. It does not establish optical splitting.

Features and Practical Benefits

Choose the internal components: Fit compatible adapters and termination parts required by the network.

Small installation footprint: Useful where a larger distribution box would be unnecessary.

Protected organization: A suitable enclosure helps keep fiber routing and termination components together.

Project flexibility: Select UPC or APC components only where the enclosure supports them and the network design requires them.

View the same FAT Box 1×2 Empty at Tawa. Tawa

Selecting the Right Components

Confirm adapter mounting dimensions, splice-holder provision, cable-entry size, and available slack space.

If optical splitting is required, specify it separately. For example, the 1×2 splitter with SC/UPC connectors at Tawa is an optical component, not an empty enclosure.

How to Install It

1. Inspect the enclosure. Check internal space, mounting points, entries, and supplied fittings.
2. Select compatible optical parts.
3. Choose a suitable location. Match the environment to the box rating.
4. Mount securely.
5. Bring the cable through the approved entry. Provide appropriate strain relief.
6. Install adapters or other compatible components.
7. Prepare and terminate the fibers. Protect any fusion splices.
8. Arrange slack without tight bends.
9. Test the optical connection.
10. Close and label the box.

Advantages and Disadvantages

Advantages

• Flexible component selection.
• Compact termination arrangement.
• Useful for small fiber jobs.
• Passive enclosure needs no power.

Disadvantages

• Additional optical parts are required.
• Capacity and fit must be checked.
• Does not provide optical splitting by itself.
• Environmental protection varies.

Troubleshooting and FAQs

Can it be used outdoors?
Only if the selected enclosure has an appropriate environmental rating.

Can I fit any splitter inside?
Check dimensions, bend radius, mounting, and fiber routing requirements.

Why does the lid press against the fibers?
Rearrange slack and verify that the components fit the enclosure.

Browse Reisen SEO’s fiber terminal boxes, bare PLC splitters, and fiber accessories.

Contact Reisen SEO for the empty enclosure and matching components.